{
  "PRINT_FIRST_joystick_corner_v2": {
    "size_mm": [
      30.5,
      30.5,
      7.80000019073486
    ],
    "volume_mm3": 2395.5158853544576,
    "watertight": true,
    "connected_solids": 1,
    "print_z_min": 3.3445648611334132e-15
  },
  "WAIT_full_top_plate_v2": {
    "size_mm": [
      94.0,
      94.0,
      7.800000190734863
    ],
    "volume_mm3": 15960.637953758933,
    "watertight": true,
    "connected_solids": 1,
    "print_z_min": 0.0
  },
  "reference_joystick_overlap_mm3": 0.0,
  "existing_case_overlap_mm3": 0.0,
  "source_plate": "Unchanged switch, encoder, touch, status LED and M3 case hole geometry outside joystick area.",
  "mounting": "Same M1.6 x 8 DIN912 screws and M1.6 DIN934 nuts as v1; no loose shims.",
  "limits": [
    "Physical fit and stiffness unverified.",
    "Stock thumb-cap shape and full travel not accurately modeled; test in all directions.",
    "Printed nut-pocket and screw-slot fit unverified.",
    "Support removal must preserve the body seat and wire opening.",
    "Full plate withheld from recommended printing until corner fit passes."
  ]
}